Wednesday, July 1, 2015

Challenging Geese

I'm thrilled to be a part of Scrap Quilt Challenge 5! Many thanks to Shannon and her crew at Fabrics N Quilts for inviting me to participate again this year and for organizing a cool way to focus on scraps, completed projects, and summer time all at once! Prizes, too! All you have to do is make scrappy quilts! AND, there's a special deal waiting for you on this post when you make it all the way to the bottom of the tutorial. . . so let's get started!




Since there might be some folks visiting this post who may not already be familiar with me, I'll start with a short self-introduction: 


Nuff with the formalities!

Last year, my tutorial involved the ScrapTherapy Mini Scrap Grid Interfacing and this cute-as-a-button table runner project. 

button table runner


For my tutorial this year, I thought I'd provide a little twist on the traditional Flying Geese unit--we're on the Hummingbird Highway, after all, and birds are my 'thing.' I'm focusing in on the 3x6" finished size. For my tutorial I'm also using 1-1/2" squares trimmed from my 2" scrap squares from my bin of pre-cut scraps, some Middle Scrap Grid Interfacing, and some fun techniques filled with variety. 

The ScrapTherapy Middle Scrap Grid interfacing is printed by Quiltsmart, and has fusible material on one side, and lines printed on the other. Four different types of lines tell you where to align and fuse scrap squares, clip, sew, and cut. For a more general, detailed tutorial on using the Middle Scrap Grid to make 9-patch blocks, click here. For the Flying Geese, we'll take a few departures from the general tutorial so, don't go too far astray as you follow along step by step.

For starters, the Middle Scrap Grid comes by the panel and there's enough interfacing on one panel to make 24 9-patch blocks. OR, with a few variations in sewing, we can make twelve 3x6" rectangular patches from each panel. 

Middle Scrap Grid Interfacing


First, place the grid on your ironing surface, fusible side of the interfacing up. Arrange similar color and value 1-1/2" square scraps on the fusible side of the interfacing and fuse with a hot iron when the entire grid is covered with scraps. Refer to the general tutorial to trim the interfacing, place the scraps, and fuse. I'm using a variety of green, blue, and purple scraps in mostly medium values because I just finished a quilt made with green, blue, and purple fabrics. (Funny how that works!)

Middle Scrap grid interfacing and scrap fabrics


Next follow the general tutorial to sew six seams, width-wise. (Is that a word? What I mean is sew across the shorter dimension of the rectangle.) Skip the third and sixth seam markings at the red arrows. As a reminder, fold on the dotted lines; sew on the solid lines. Be sure to align the solid lines front to back before you sew, and sew directly on the solid lines 

Middle scrap grid interfacing


Should look like this from the right side. Notice the seams with the red X aren't sewn.

Middle Scrap Grid intefacing


Now clip the interfacing at EACH the seam intersection at the cross hairs (+) and at the dots (.). Five clips per seam. To make 9-patches, you'd have four clips per seam.

clipping the middle scrap grid interfacing


Be sure you clip the seam THROUGH the stitching . . .

clipping the middle scrap grid interfacing


 . . . so you can nest and oppose the seams. Make pairs of seams that are pressed TOWARD each other on one side and AWAY FROM each other on opposite sides. I call these innies and outies. See the red 'away' arrows and the green 'toward' arrows? Don't forget, fold on the dotted line, sew on the solid line.

nesting quiltng seams


Alternate seam direction as you sew each long row.

seam pressing direction


You should have five lengthwise seams. If you want to make 9-patch blocks, you wouldn't have sewn the third seam (circled in red, view from the back)

Middle Scrap Grid seams


Now cut apart the interfacing at the only two remaining unsewn seams. Cut on the dashed lines.


Middle scrap grid 9-patch


Next, we need to press. I like to 'furl' my seams. Like for 4-patch blocks. But because the interfacing is involved, I need to adjust the pressing technique a wee bit. Instead of having opened mini 4-patches on the back right at the seam intersections, you can make little compressed triangles. Refer to the general tutorial for more specifics.

furled seams


Once all your seams are pressed, the block base should be 3-1/2x6-1/2". I like to double check the measurement and trim off any spillage caused little variables in scrap placement, sewing blips, or general adjustments.

trimming


Repeat until you have the desired number of rectangular bases for your geese. I made 8, all the same, or since they are scrappy, maybe better that I say all are similar. Put those aside for a moment or two.

Flying Geese in progress


Cut some 3-1/2" squares. Two squares per block. I chose a solid, high-contrast color. Draw a diagonal line corner to corner on the back. 

HST lines


Align the square on one end of the block and sew on the line. . . . then. . .

Flying Geese in progress


. . . turn the block over.

Flying geese


See the existing seam? Leave that alone for now, and draw another line that connects the circled 9-patch seam intersection points.

flying geese


Sew on the second line, then cut 1/4" away from each line as shown. 

flying geese


Set the little triangle aside for the moment and press the dark square toward the corner. Repeat the process to add a second triangle to the opposite end of the unit. Don't forget to make the little guy, too!

flying geese


That's a Scrappy Flying Geese unit! I chose to alternate two different colors of flip-and-stitch squares on each end of each unit I made. You can make them both the same fabric, if you prefer.

Flying geese quilt block


Then I arranged the geese units to create a really scrappy block. Imagine the possibilities with matching squares on each Flying Geese, or pairs of matching squares on alternating units, cool tone scraps/warm tone stitch-and-flip squares, sashing in between geese, geese in a row . . . you get the idea. Endless possibilities. My block measures 12-1/2". 

quilt block


Now, you didn't think I was going to let any of this scrappy goodness go to waste, did you? Retrieve the small corner triangles and press the solid triangle away from the scrappy triangle. Notice the three little red dots. Use a ruler to align the middle dot with the 1" intersecting lines on the ruler, and the two outer dots with the 2" markings at the ruler's edge. All three dots should be right on the pressed diagonal seam. Trim the block on two sides. . . 

Flying Geese Leftovers


 . . .  and flip the block and trim the remaining two sides. 

Flying Geese Leftovers


Result: a cute little 2" square pieced half-square triangle unit!

Flying Geese Leftovers


Make a bunch.

Flying Geese Leftovers


Then dig out one 9-patch-worth--or more if you like--of the LITTLE Scrap Grid! And. . .

Flying geese Mini Mug Mats


 . . . arrange the 2" pieced units on the Little Scrap Grid . . . like this . . .

Flying geese Mini Mug Mats


. . . or this . . . or any number of different ways. Fuse, sew following the general tutorial for Little Scrap Grid. Then make a Mini Mug Mat, if you like! 

Flying geese Mini Mug Mats


Here's another block option incorporating the scrappy Flying geese units as well as four 9-patch blocks for the corners and four 9-patch blocks for the center. This block finishes to 12" square. Also, notice the 5" square Mini Mug Mat made from the leftover Flying Geese corners.

quilt block


AND, as long as we're considering lots of options. Why not make the base a solid fabric, and use 9-patch blocks made from the Middle Scrap Grid for the outer corners?

fllying geese


Press the seams toward the larger triangle to accommodate the bulky seams on the 9-patch stitch-and-flip unit.

flying geese


And you'll even have leftovers, just like before! 

flying geese

I hope you've been inspired! Of course, you don't need to have the Middle or Little Scrap Grid to make your wildly scrappy Flying Geese units, but I have to admit that I'm addicted to the stuff. 

Save 25% When You Purchase Your Scrap Quilt Challenge 9-Patch Bundle by July 31st!


I'd love for you to try it, too! Therefore, I'm offering a little incentive only during this first month of Scrap Quilt Challenge 5, with a special bundle for you

CLICK HERE to purchase the Scrap Quilt Challenge 9-Patch Bundle which includes four panels of ScrapTherapy Middle Scrap Grid Interfacing (enough to make 96 Scrappy Flying Geese, or twice that many 9-patch blocks), one panel of ScrapTherapy Little Scrap Grid Interfacing (enough to make 12 scrappy leftover Mini Mug Mat tops), plus a package of Mini Mug Mat Just the Batting (six pieces of 5" pre-cut double sided fusible foam batting) for the mug mats. The regular price for all the stuff in this special bundle is $50. Buy it this month for $37, and save 25%. The special price is good between now and July 31st, 2015.

Have a fantastic, scrappy summer, and
Happy Stitching!
Joan

7 comments:

  1. What a great way to spend the end of summer! Working "on the grid"!

    ReplyDelete
  2. I really like this. I have lots of left-over cuts from flying geese blocks.

    ReplyDelete
  3. I really like this variety of left-overs, already made up. Cle-ver

    ReplyDelete
  4. Great tutorial ... thanks ... :) Pat

    ReplyDelete
  5. Thanks for the tutorials. I wondered for a guideline for all my leftover flying geese-like scraps. Now I know. I will start this tomorrow. To late for the challenge, but it will be a challenge for me to make use of these wonderful pieces in a block that I just adore. Love both tutorials.

    ReplyDelete
  6. Joan, I have two of your books and have cut up a lot of the bundles of fabric in my closet into 2", 3 1/2" and 5" squares. I am only halfway through the closet. I'm saving these instructions for when I get all the fabric cut up and can sort the scraps.

    ReplyDelete